Stainless steel stair connector for enclosed wooden stringer staircases with risers

Graduated sleeveﾠin machining steel

Stringer thickness >40mm

No joint between stringer and step.

Quantity 1ﾠ= 1 connector + 1 graduated sleeveﾠ+ 2 screws

straight step = 4 pcs.(2 x Option 1 for the rear edge of the step and 2 x Option 2 for the front edge of the step)

large corner step = 5 pcs. (2 x Option 1 for the rear edge of the step and 3 x Option 2 for the front edge of the step)

Half of each option, 1 and 2, is supplied, with 1 extra piece ofﾠOption 2 for odd-numbered amounts.

Thanks to Option 2, the step board has 7mm of clearance to move around.

Stainless steel stair connector for screwing with steel stringers

Graduated sleeve in machining steel

Stringer thickness from 8mm

Practical 4mm joint between stringer and step. In the case of enclosed staircases, the joint can also have a rubber seal.

Quantity 1 = 1 connector + 1 graduated sleeveﾠ+ 1 step screw

straight step = 4 pcs. (2 x Option 1 for the rear edge of the step and 2 x Option 2 for the front edge of the step)

large corner step = 5 pcs. (2 x Option 1 for the rear edge of the step and 3 x Option 2 for the front edge of the step)

Half of each option, 1 and 2, is supplied, with 1 extra piece ofﾠOption 2 for odd-numbered amounts.

Thanks to Option 2, the step board has 7mm of clearance to move around.

Pull bar for easier installation of wall bolt TV95-15.

The wall bolt is pulled to the front of the step with the pull bar..

Stainless steel bar connector, suitable to banister-bearing staircases with 16/2mm stainless steel bars.

Practical 4mm joint between baluster and step

Rounded stainless steel stair connector for wooden stringer staircases

without graduated sleeve

Stringer thickness >ﾠ40mm

Practical 4mm joint between stringer and step

Quantity = 1 connector + 2 screws

straight step = 4 pcs.

large corner step = 5 pcs.

We do not accept product liabilityﾠfor installation of steps without a graduated sleeve.

This connector has received the Red Dot Design Award for innovation in form and function.

Stainless steel wall rosette d = 29.5mm with hole diameter ﾠinterior ﾠd = 8ﾠmm and aﾠgraduated hole 12.3mm for 12mm stainless steel bar.

Printing plate forﾠ stable bracing of two wooden posts with a stainless steel spacer bar.

20 pc. packaging unit.

Stainless steel stair connector for wooden stringer staircases

Graduated sleeveﾠin machining steel

Stringer thickness >40mm

Practical 4mm joint between stringer and step.ﾠ In the case of enclosed staircases, the joint can also have a rubber seal.

Quantity 1 = 1 connector + 1 graduated sleeveﾠ+ 2 screws

straight step = 4 pcs. (2 x Option 1 for the rear edge of the step and 2 x Option 2 for the front edge of the step)

large corner step = 5 pcs. (2 x Option 1 for the rear edge of the step and 3 x Option 2 for the front edge of the step)

Half of each option, 1 and 2, is supplied, with 1 extra piece ofﾠOption 2 for odd-numbered amounts.

Thanks to Option 2, the step board has 7mm of clearance to move around.

Diamond bit hollow-core drill 25x150mm, ring segment, for dry operation (porous concrete, bricks, expanded clay brick) with tension shaft that has a max. diameter of 13mm.

10 Stück Wangenbefestigungen in Edelstahl für Pfosten mit 42,4 mm.

Durchmesser 30 mm, Länge bis Pfosten 24 mm, Durchgangsloch 8,5 mm

Verpackungseinheit 20 Stück = Anzahl 1 in den Warenkorb legen.